EnduroSharp® Torlon® Aircraft Maintenance Tools – Why Use a Pneumatic Tool

July 27, 2022  |  , , ,

EnduroSharp® has improved the way aerospace maintenance professionals remove sealants and adhesives from substrates and fasteners.  EnduroSharp® resharpenable, non-marring tools are made from Torlon®, a high strength polymer, creating a non-metallic blade tool that will not damage composite structures during use.

Many of our EnduroSharp® tools can be used in conjunction with a pneumatic tool.  A pneumatic tool is one that’s driven with the assistance of compressed air rather than electricity.  Pneumatic tools rely on air compressors to provide a burst of air to perform its operation. A pneumatic tool can operate indefinitely as long as the attached air compressor can deliver the required volume and pressure without interruption.

Pneumatic Tools are very strong air powered tools and provide the user with a tremendous amount of labor and time saving torque.

Pneumatic tools provide many advantages:

  • Main advantage is they are far less expensive than their electric alternatives.
  • Provide a degree of safety in wet areas where electric motors can be dangerous.
  • Lighter in weight than their electric counterparts.
  • Pneumatic tools can deliver large amounts of torque or operate for long durations of time.
  • More flexible than electric – nearly all air-driven tools use the same ¼” quick connect fittings.

Generally, pneumatic tools are smaller, more versatile, easy-to-use and safer than traditional electric tools.  Since pneumatic tools are usually lighter, the user is able to have better control and experience less fatigue and strain.  They are also able to withstand various elements such as dust, heat and water better than electric tools.

The EnduroSharp® Pneumatic Tool for Scraper Blades is just one of the many products offered in the EnduroSharp® Product line. Contact Rich Reed,  Vice President of Sales and Marketing, at (513) 321-8404 or [email protected], for more information.

 

/by

PEEK, PAEK and PEI are Great Alternatives During Material Shortages

July 19, 2022  |  , , , ,

Navigating supply chain issues in this economic environment where there are rampant material shortages is an ongoing challenge. But many commonly used engineered resins may serve well as replacements for your application. Performance Plastics are experts in material selection and can assist your organization in choosing the best material based on the functionality of your part.

PEEK (Polyether Ether Ketone), PAEK (Polyaryletherketongs) and PEI (Polyetherimide) are high performing engineering thermoplastics that offer a unique combination of thermal stability, chemical resistance, and excellent mechanical properties.

PEEK is extremely tough and has very high impact strength.  Due to the crystalline nature of the material, a high degree of mechanical properties is retained close to their melting temperature.  The also have a low creep and good wear properties.  It is also known for excellent chemical resistant during hydrolysis. PEEK is actively used in metal to plastic replacement applications.

PAEK is a high thermal stability material that offers high strength and high resistance to oxidation. It offers better solvent resistance and is more amorphous based on its semi-crystalline structure.  This makes it an excellent choice for medical components, sea equipment and valve components.

PEI is a high-performance engineering plastic that offers outstanding thermal, mechanical and chemical properties.  It is often the best choice where high mechanical strength is needed in conjunction with high temperature, corrosion and wear resistance. This makes PEI an excellent alternative for applications requiring tight tolerances and low warp such as medical devices, scientific equipment parts and semiconductor equipment components.

Performance Plastics are specialists in high performance plastics engineering for many industries including medical, defense and industrial applications. We partner with our customers to offer solutions to some of the most challenging applications.  For more information, please contact Rich Reed, Vice President of Sales & Marketing at 513.321.8404 or email [email protected].

/by

All You Need to Know About EnduroSharp Torlon Gap Filler Removal Discs

July 14, 2022  |  , , ,

EnduroSharp® has changed the way aerospace maintenance professionals remove sealants and adhesives from substrates and fasteners. EnduroSharp® tools are made from Torlon®, a high strength polymer, creating a non-metallic tool that will not damage composite structures during use. The EnduroSharp® lineup consists of a variety of scraper blades, gap blades, reamers, cutters, bits, and discs for removal of adhesives on aircrafts. The product line also includes a variety of kits containing a selection of parts and sizes.

Traditionally, aerospace maintenance professionals removed sealants and adhesives from  gaps utilizing solvents and/or abrasive scraper tools.  Solvents are very dangerous in that they may dissolve unintended materials, and produce hazardous fumes.  Abrasive scraper tools are often hard to control and may cause unintended substrate damage.

EnduroSharp® Torlon® Gap Filler Removal (GFRD) Discs are designed for use with a pneumatic tool. The tools provide aerospace maintenance professionals with an effective method of safely removing flexibilized epoxy gap materials as well as cutting or scoring thick elastomeric coatings without damaging composite substructures.

EnduroSharp® Torlon® Gap Filler Removal (GFRD) Discs are shipped 4 parts per box.

The EnduroSharp® Torlon® Gap Filler Removal Discs are just one of the many different items offered in the EnduroSharp® product line. Contact Rich Reed our Vice President of Sales and Marketing, at (513) 321-8404 or [email protected],  for more information on our EnduroSharp® kits and products.

/by

It’s Not Tight Tolerance Unless You Can Measure It – Industrial CT Scanning

July 12, 2022  |  , , ,

As you’re designing and manufacturing your next application, wouldn’t it be ideal if you could analyze all the parts, compare them to the original drawings and get results quickly, without damage? At Performance Plastics, we have the ability to do this through industrial computed tomography (CT) scan. Giving us the ability to measure all aspects of your part, without having to damage it.

Industrial CT scanning gives you access to the inner workings of a part without having to destroy the original. The scanner rotates the part 360 degrees and uses X-rays to create a precise 3D model. This allows for a thorough analysis of object dimensions, porosity, wall thickness, assembly defects, comprehensive comparisons, and reverse engineering.

The CT scan can then be compared to the CAD model and to other parts. Plus, it can easily analyze surface variations and provide cross sections to reveal hidden features.

Performance Plastics now offer a variety of CT scan-related services:

  • Part-to-CAD comparisons create a precise overlay of the scanned part to the original 3D part model database
  • Part-to-part comparisons provide an overlay of two scanned parts to reveal dimensional deviation
  • Void and inclusion analysis provides material and defect analysis showing void or inclusion size and locations
  • Wall thickness analysis measures slight changes in the wall stock of complex parts without destructive testing
  • Dimensional analysis provides full article inspections and reporting
  • Reverse engineering capabilities that generate a 3D CAD file

Industrial CT scanning can be necessary during five different manufacturing stages. When you’re in pre-production, it can help with the project design and analysis. During production, you can use CT scanning to evaluate consistency. At the failure investigation stage, it will find defects. The CT scanner can run repeatability tests when you’re doing inspections. And if you need design adjustments or are doing further R&D, it can help with reverse engineering.

As for what Performance Plastics can handle when CT scanning:

  • Maximum part size is 300mm diameter x 350 mm tall
  • Scan time is typically less than one hour
  • Accuracy (using Calypso) of 9+L/50 microns
  • X-ray-based measurement system is non-contact
  • Parts do not require potting

At Performance Plastics, we are experts in injection molding, specializing in high performance plastics for medical device components. Our proprietary tool design software, processes and equipment enable us to injection mold components having complex geometries made from challenging ultra, high-performance thermoplastic materials, and reinforced compounds.

For more information on Performance Plastic’s capabilities, please contact Rich Reed, Vice President of Sales, and Marketing at 513.321.8404 or email at [email protected]  

 

/by

EnduroSharp®Nonmetallic (Torlon®) Aircraft Maintenance Tools

June 30, 2022  |  , , , ,

EnduroSharp® has changed the way aerospace maintenance professionals remove sealants and adhesives from substrates and fasteners. EnduroSharp® resharpenable tools are made from Torlon®, a high strength polymer, creating a non-metallic blade tool that will not damage composite structures during use.

The lack of reliable and effective nonmetallic material removal tools available to maintainers drove the continued use of unapproved tools and/or methods for removing materials from aerospace vehicles. The use of metallic tools has resulted in damage to vehicles, both short term and long term, causing the need for expensive repairs and reduction in vehicle availability.

Because of this need, The University of Dayton Research Institute under contract to the Air Force Research Laboratory developed a series of nonmetallic material removal tools under the “EnduroSharp” trademark manufactured from Torlon thermoplastic manufactured by Solvay Engineered Plastics and produced by Performance Plastics of Cincinnati OH.

Attached is the published white paper outlining the development of the “EnduroSharp®” line of Torlon® non-metallic aircraft maintenance tools.  In this paper you will find:

  • Abstract
  • Background
  • Prototype Development Path
    • Gap Filler Removal Bits
    • Torlon Scraper Blades
    • Torlon Gap Blades
  • Results
  • Conclusions

To review the white paper in full, please click here.

EnduroSharp® Products are currently approved for use by numerous governmental and corporate defense organizations including the USAF, USMC, USN, USCG, Lockheed Martin, Boeing, and Dassault.

EnduroSharp® Products are now available as individual components, tools and consumables or as Aviation Kits.

For more information on the EnduroSharp® line or Torlon® Aircraft Maintenance Tools, please contact our Vice President of Sales and Marketing, at (513) 321-8404 or visit our website at www.performanceplastics.com/endurosharp.

 

/by

Benefits of Reshoring for Medical Device Manufacturers

June 28, 2022  |  , , , ,

Medical devices must be dependable and safe, and moving operations back to the United States allow companies to have better control over the entire operation – procurement, engineering, production, and distribution.  The result is a higher standard of quality in products.  Medical device companies and other advanced industries need to have extensive and precise control over the entire supply chain of their products.

As an American small business, Performance Plastics is pleased to see the trend of manufacturing operations moving back to the United States.  A range of economic and strategic factors due to the recent epidemic have tipped the scales exponentially since 2020.

While there are many benefits of reshoring, some of the most important reasons include:

  • Greater Control of Supply Chain

Getting all your moving pieces to work seamlessly can be a near impossible task, especially across language and time zone barriers.  One of the primary advantages of reshoring is that it allows you to tighten your supply chain.

  • Reduced Lead Times

The greater the distance between where your device is manufactured and where you are located, the longer you can expect your lead time to be.  However, distance is not the only factor.  When moving from one country to another, inspection and transportation times between countries can add up to 50% to your lead time.

  • Fewer Import Tariffs

Import tariffs vary from administration to administration, but they will always be in place.  The recent increase in tariffs have caused the cost advantages of manufacturing offshore to shrink.

  • Reduced Energy Costs

Recent changes to international gas and power prices have drastically increased the prices of manufacturing and transportation from other countries.  Impact on the environment and achieving higher sustainability are very important to consumers.

  • Potential to Improve Brand Perception

Although we live in an international community, the origin of a product still has an impact on the perception of quality.  Some lower cost manufacturing countries even have a perception of being “dangerous”.

Medical devices necessitate the highest quality standards possible, which can’t always be regulated in an offshore manufacturing environment.  The vast global, economic, legal and social changes are all very dynamic and unpredictable in nature – making relocating operations a more sustainable, stable and efficient choice.

At Performance Plastics, we are experts in injection molding, specializing in high performance plastics for medical device components. Our proprietary tool design software, processes and equipment enable us to injection mold components having complex geometries made from challenging ultra, high-performance thermoplastic materials, and reinforced compounds.

For more information on Performance Plastic’s capabilities, please contact Rich Reed, Vice President of Sales, and Marketing at 513.321.8404 or email at [email protected] 

 

/by

EnduroSharp® Torlon® Scraper Blades and Gap Blades – What’s the Difference?

June 23, 2022  |  , , ,

 

EnduroSharp(R) Gap Blades & Adapter

EnduroSharp® has changed the way aerospace maintenance professionals remove sealants and adhesives from substrates and fasteners. EnduroSharp® resharpenable tools are made from Torlon®, a high strength polymer, creating a non-metallic blade tool that will not damage composite structures during use.

Scraper blades are designed for use in larger areas where a large quantity of material needs to be removed. Made from a non-marring Torlon® material the blades are a quick, safe and effective method of removing sealants and adhesives from composite structures.

Gap blades are designed for use in smaller grooves and channels where scraper blades are too large.  With a multi head edge, gap blades offer the ability to eliminate materials from multiple surfaces of the seam.

Technicians often use a scraper blade in applications where a gap blade will deliver a quicker, cleaner result.  While the scraper blade offers one cutting edge, the gap blades offer three, allowing the removal of sealants and adhesives from the surfaces more completely.                                                   

The tools are designed to complement each other.  By using an adapter tool, both the scraper blades and gap blades can be used with the same handle.  This provides the technician the ability to switch the blades based on the progression in the removal process.

Using the adapter also allows for the application of flexible incremental skiving techniques when removing sealants and adhesives.  Incremental skiving involves the technique of removing subsequent thin layers of material to achieve a cleaner finish.  The technician can switch back and forth between the blades as needed.

The EnduroSharp® scraper and gap blades are just a few of the many products offered in the EnduroSharp® Product line. Contact Rich Reed for our Vice President of Sales and Marketing, at (513) 321-8404 or [email protected], more information on our EnduroSharp® kits and products.

 

 

 

 

 

 

 

/by

Ultem® Use in Industrial Applications

June 21, 2022  |  , , ,

Ultem Polyetherimide is a material widely used in industrial applications.  It is an amorphous material with exceptional strength, flame resistance and generates very low levels of smoke. It is often used in the production of circuit boards, sterilization equipment, battery components and oil and gas equipment,

ULTEM is commonly used in industrial applications needing a durable, high-performance, cost-effective alternative to metal: strong enough to replace steel in some applications and light enough to replace aluminum in others.   It outperforms comparable thermoplastics when it comes to resisting creep and does not degrade under repeated mechanical stress. It also holds up well when brought into contact with various fuels, coolants, and lubricants

ULTEM has one of the highest dielectric strengths of any thermoplastic material. It works very efficiently as an electrical insulator. ULTEM also has one of the lowest rates of thermal conductivity, allowing parts machined from ULTEM to act as thermal insulators. ULTEM offers excellent long-term heat resistance with its mechanical and physical properties remaining stable at elevated temperatures.  Unlike most other amorphous plastics, ULTEM resins retain strength and resist strength cracking when exposed to environmental stresses.

Ultem is now widely used in:

  • Automotive
  • Semiconductor
  • Telecom Components
  • Molded Interconnect Devices
  • HVAC/Fluid Handling Devices
  • Oil & Gas Applications

At Performance Plastics, we are experts in injection molding, specializing in high performance plastics. Ultem® is an amorphous material, which can cause complications during the injection molding process. A specific set of conditions, equipment, and processing procedures must be followed to effectively injection mold Ultem®. Our proprietary tool design software, processes and equipment enable us to injection mold components having complex geometries made from challenging ultra, high-performance thermoplastic materials, and reinforced compounds.

Ultem® is one of the many high-performance polymers in which Performance Plastics specializes.  For more information on Performance Plastic’s capabilities, please contact Rich Reed, Vice President of Sales and Marketing at 513.321.8404 or email at [email protected].

/by

High Performance Polymers – A Great Alternative for Medical Devices

June 9, 2022  |  , , ,

Diabetes care has seen several innovations through the years. One of the most important developments is the insulin pump, which for many patients provides an option to the traditional needle and syringe approach to insulin injections. Insulin pumps are small, computerized devices that are about the size of a small cell phone.  Insulin pumps deliver doses of insulin, the hormone that regulates blood sugar, on a pre-programmed schedule.

High performance polymers have enabled medical device manufacturers to go beyond the functionality of ordinary plastic materials to develop innovative devices for treating diabetic patients.  Resins such as FEP and PFA fluoropolymers are chemically resistant resin with outstanding properties and are currently used in numerous healthcare applications. Physical properties of resins such as high tensile strength, dimensional stability, excellent friction and wear characteristics and the ability to replicate fine features are important advantages as parts become smaller and thinner.

In developing new and advanced insulin delivery devices, resins offer unique advantages and have expanded the possibilities for innovative design and manufacturing. Medical grade fluoropolymers, such as FEP and PFA allow for the miniaturization of device components without the constraints of glass or ordinary plastic materials. With these capabilities, designers can now expand design performance and possibilities. Fine detail replication resulting from the material’s high flow and excellent dimensional stability properties position resins as an excellent material for lightweight and compact precision delivery devices.

Device components such as insulin storage require the use of a proven polymer materials. In addition to compatibility with insulin, purity and very low levels of leaching, resins provide excellent moisture barriers and extremely low water absorption, both necessary properties for optimal long-term drug container storage. These resins are also FDA approved and are compatible with all conventional sterilization methods from gamma to steam.

In future insulin delivery systems, the use of FEP and PFA resin components for various parts of the device will continue to rise. With the advantages engineering polymers offer for design innovation and performance, resins will continue to be the material of choice for delivery applications.

At Performance Plastics, we are experts in injection molding, specializing in high performance plastics. Our proprietary tool design software, processes and equipment enable us to injection mold components having complex geometries made from challenging ultra, high-performance thermoplastic materials, and reinforced compounds. For more information on Performance Plastic’s capabilities, please contact Rich Reed, Vice President of Sales, and Marketing at 513.321.8404 or email at [email protected].

 

 

PFA plastic (Fluoropolymer) Thermoplastic Components

/by

Product Spotlight – EnduroSharp(R) Scraper Blade & Holder Kit

June 7, 2022  |  , , ,

EnduroSharp® has changed the way aerospace maintenance professionals remove sealants and adhesives from substrates and fasteners. EnduroSharp® tools are made from Torlon®, a high strength polymer, creating a non-metallic scraper tool that will not damage composite structures during use. The EnduroSharp® lineup consists of a variety of scraper blades, gap blades, reamers, cutter, bits, and discs for removal of adhesives on aircrafts. The product line even consists of kits containing all of the parts and sizes that you will need.

The EnduroSharp® Scraper Blade & Holder Kit is one of the most popular kits ordered. This kit includes the standard scraper blade holder, pocket scraper blade holder, and 2 scraper blades of each size. EnduroSharp® Torlon® Scraper Blade (TSB) inserts come in 5 different sizes, TSB-170, TSB-230, TSB-500, TSB-750, and TSB-1200. The blades slide and lock into the detent pin of the standard scraper blade holder handle, to easily alternate between the sizes as needed. This kit also contains the pocket scraper blade holder for use of the scraper blades in smaller areas.

The EnduroSharp® Scraper Blade & Holder kit is just one of the kits offered in the EnduroSharp® Product line. Contact Rich Reed for our Vice President of Sales and Marketing, at (513) 321-8404 or [email protected], more information on our EnduroSharp® kits and products.

 

 

/by