Thermoplastic medical spinal implant component, precision thermoplastic medical check valve, non-contaminating Thermoplastic medical valve component, precision thermoplasticmedical spinal implant component, non-contaminating medical spinal implant component

High Precision, PEEK, Thermoplastic Medical Spinal Implant Component

As technology continues to advance, medical device designers are being asked to increase performance and longevity of devices while decreasing costs. One of the most effective methods of achieving both goals is through a metal-to-plastic conversion using a medically compatible resin.

Newer polymers allow for the design of multiple features into one molded component and can replace metal components or multiple smaller parts. By improving the product design and manufacturing process with the latest materials and plastic manufacturing techniques, medical device designers can improve performance of the medical device while reducing its cost.

Medical devices continue to get smaller and more complicated. The size and complexity issues present opportunities for metal-to-plastic conversion. Small tools often are used by professionals who are gloved, and resins offer the ability to apply texture and reduce weight. By using a material that provides improved wet-grip characteristics and ergonomics, designers are able to improve the overall functionality of products. The use of properly selected thermoplastic elastomers (TPEs) allows for products that withstand sterilization to be made more effectively.

Instruments that must be repeatedly cleaned and sterilized, sometimes multiple times a day such as dental instruments, can now be made from high-performance materials such as polyether imide (PEI), or polyetheretherketone (PEEK) polymers. These improvements result in better medical devices often at lower manufacturing costs.

Medical resins are ideal for bone implants. Devices made from PEEK polymer are a better match to the normal flexibility of a bone for implants. When a stainless-steel implant is used, the adhesion between the implant and bone tends to loosen over time, because the bone has a small amount of flexibility. A stainless-steel implant does not flex.

By using PEEK polymer as the implant stem, rather than traditional stainless steel, the polymer has close to the same flexibility as the bone and there is a reduced tendency for the implant to loosen over time. This compatibility between bone and polymer makes a more effective medical device — one that will allow better long-term outcomes, especially as the average life span of an implant increases in tandem with the life expectancy of the general population.

 

 

https://www.plasticstoday.com/medical/plastics-edge-over-metal-medical-device-fabrication